1. ATV Fenders Offers
  2. sku: 24836599541560881
  3. HONDA MOTORCYCLE 87121-HN6-A50ZA

HONDA MOTORCYCLE 87121-HN6-A50ZA Fenders

fits model: 250ex, Mark. make: Honda. year: 2008.

87121-hn6-a50za Honda Motorcycle 2008 250ex Mark New Oem

( Brand: Honda Motorcycle ), ( Manufacturer Part Number: 87121-HN6-A50ZA ), ( Type: Parts )

Review HONDA MOTORCYCLE New Oem fits MARK 250EX 2008

The **Honda 87121-HN6-A50ZA 2008 250EX** is a meticulously engineered, high-performance dirt bike designed to deliver an exhilarating riding experience for both seasoned enduro riders and enthusiasts looking to explore off-road adventures with precision and reliability. Part of Honda s legendary **Aerobike** series, this model features a **499cc, liquid-cooled, single-cylinder engine** with a **Digital Valve Control (DVC)** system, which optimizes valve timing for improved throttle response, smoother power delivery, and enhanced fuel efficiency making it ideal for long-distance rides or technical terrain where consistency is key. The engine is paired with a **6-speed transmission** and a **slipper clutch**, allowing for seamless gear shifts and better control during aggressive riding, while the **permanent four-stroke design** ensures cleaner emissions and reduced maintenance compared to two-strokes. The **Aerobike s iconic aerodynamic fairing** not only enhances its sleek, modern appearance but also reduces wind resistance, improving stability at high speeds and making it one of the most efficient enduro bikes of its class.

Mechanically, the **2008 250EX** is built on a **high-tensile steel frame** with a **dual-cradle design**, providing a perfect balance of rigidity and comfort for rough trails. The **front suspension** is equipped with **41mm Showa inverted cartridge forks** with adjustable preload and rebound damping, while the **rear suspension** features a **pro-link system with adjustable preload**, ensuring optimal wheel travel (200mm front, 210mm rear) to absorb impacts from uneven terrain. The **disc brake system** at both ends **front and rear** delivers strong, consistent stopping power, with the front brake featuring a **single-piston caliper** and the rear a **single-disc setup**, both paired with **Honda s durable brake pads** for reliable performance in all conditions. The **traction control system** (adjustable in three modes) further enhances stability, making it easier to tackle steep climbs or slippery surfaces without losing control.

The **2008 250EX** is also designed with rider comfort and ergonomics in mind. Its **ergonomic seat** provides ample padding for extended rides, while the **adjustable handlebar height** and **telelever steering system** allow for a customized riding position, reducing fatigue on long enduro journeys. The **fuel-injected engine** ensures consistent power delivery across a wide RPM range, and the **digital fuel gauge** helps monitor fuel levels efficiently. Additionally, the bike s **durable, high-quality components** such as the **sealed chain drive**, **robust kickstart mechanism**, and **corrosion-resistant paint** contribute to its reputation for longevity and dependability, even in harsh off-road environments. Whether navigating technical singletrack, cruising through open trails, or tackling rocky descents, this Honda **250EX** combines **cutting-edge technology, proven reliability, and a refined riding experience** that sets it apart as a versatile and capable enduro machine.

For riders seeking a **high-performance, all-around enduro bike** that balances power, comfort, and durability, the **2008 Honda 250EX** remains a standout choice. Its **Aerobike heritage**, combined with modern advancements in suspension, braking, and engine management, makes it a **timeless classic** that continues to impress both on the trail and in the garage. Whether used for daily riding, competition training, or weekend adventures, this bike offers a **seamless blend of efficiency, control, and excitement**, ensuring an unforgettable off-road experience.

### **Pros and Cons of Buying a 2008 Honda 87121-HN6-A50ZA 250EX**

#### **Pros:**

1. **Reliability and Durability** Honda is well-known for building long-lasting engines and transmissions. The 250EX, part of the Honda 250 series, is a compact, efficient, and robust outboard motor designed for small boats, kayaks, and personal watercraft. With proper maintenance, it can last for many years.

2. **Fuel Efficiency** Compared to larger outboards, the 250EX is fuel-efficient, making it cost-effective for occasional or short-duration use. It typically consumes around 2 3 gallons per hour, depending on load and conditions.

3. **Lightweight and Easy to Handle** Weighing around 50 60 lbs (depending on model variations), this motor is easy to install, remove, and transport. It s ideal for small boats, canoes, or kayaks where weight is a concern.

4. **Affordable Upkeep** Parts for Honda outboards are widely available, and labor costs are generally lower than for larger or premium brands. Routine maintenance (oil changes, spark plug replacements, etc.) is straightforward and inexpensive.

5. **Versatility** The 250EX can be used in various applications, including fishing boats, small wakeboards, or even as a secondary motor for larger vessels. Its compact size makes it adaptable to different setups.

6. **Good for Beginners** If you re new to boating or outboard motors, the 250EX is a manageable size to learn on without the complexity of larger engines.

7. **Resale Value** Honda outboards hold their value reasonably well, especially if well-maintained. A 2008 model in good condition may still fetch a decent price in the used market.

8. **Quiet Operation** Compared to some smaller outboards, the 250EX runs relatively quietly, which can be beneficial for fishing or leisurely paddling.

---

#### **Cons:**

1. **Limited Power Output** The 250EX produces around **2.5 3 horsepower**, which is sufficient for small boats but insufficient for larger loads, high-speed cruising, or towing. If you plan to use it for wakeboarding, waterskiing, or larger boats, this motor will struggle.

2. **No Electric Start (on this model)** The 250EX from 2008 is likely a **manual pull-start** model. While this isn t a dealbreaker, it can be inconvenient in cold weather or if you have mobility issues. Some newer Honda 250s offer electric start, but this model does not.

3. **Age and Potential Wear** Being from **2008**, this motor has been on the market for over a decade. While Honda engines are durable, parts like the **titanium shaft, impeller, and seals** may show signs of wear if not properly maintained. A pre-purchase inspection is highly recommended.

4. **Limited Performance in Rough Water** The 250EX is not designed for choppy or heavy seas. It may struggle to maintain speed or could be prone to flooding if not properly installed with a proper trim system.

5. **No Direct Drive Option** Some smaller outboards offer a **direct drive** option for better efficiency, but the 250EX typically uses a **geared drive**, which can be slightly less efficient in terms of power transfer.

6. **Fuel and Oil Requirements** Like many small outboards, the 250EX requires **two-stroke fuel (mixed with oil)** or, if equipped with a **Tec2** system (unlikely on this model), a separate oil supply. Two-stroke fuel can be messy and requires proper disposal.

7. **Limited Aftermarket Support** While Honda parts are widely available, aftermarket upgrades (e.g., performance impellers, exhaust systems) are rare for this size motor. Most modifications are minimal.

8. **Potential for Rust or Corrosion** If the motor has been stored improperly (e.g., in saltwater without flushing), rust can develop on the lower unit, shaft, or impeller. A thorough inspection is necessary.

---

### **Conclusion:**

The **2008 Honda 87121-HN6-A50ZA 250EX** is a **solid, reliable choice** for **small boats, kayaks, or light fishing applications** where power is not a primary concern. It offers **good fuel efficiency, ease of use, and affordability**, making it ideal for **occasional or leisurely boating**. However, if you need **more power, electric start, or plan to use it for wakeboarding or larger vessels**, this motor may fall short.

### **Recommendation:** - **Buy it if:**

- You need a **budget-friendly, lightweight outboard** for a **small boat, canoe, or kayak**.

- You re willing to **perform regular maintenance** (oil changes, spark plug checks, impeller inspection).

- You **don t require high speed or heavy-duty performance**.

- You **find a well-documented, properly maintained unit** (preferably with service records).

- **Avoid it if:**

- You need **more than 3 HP** for your intended use (e.g., towing, wakeboarding, or larger boats).

- You **prefer electric start** for convenience.

- The motor has **visible rust, leaks, or lacks maintenance history**.

- You plan to **use it frequently in rough or saltwater conditions** without proper flushing.

**Final Verdict:** This motor is a **good value for basic boating needs**, but it s **not a high-performance or heavy-duty solution**. Always **inspect it thoroughly** (or have a marine mechanic check it) before purchasing to ensure it s in good working condition. If you can find a **newer model with electric start**, that would be an upgrade worth considering.

Details:

Buyer should verify this is the exact part needed before purchasing.

part #: 87121hn6a50za price

  • $42.18

specifications atvfendersgo:

  • for models: 250ex, Mark
  • for makes: Honda
  • for years: 2008
  • brand: Honda Motorcycle
  • mpn: 87121-hn6-a50za
  • type: Parts

general atvfendersgo:

  • condition: New
  • Body Frame > Body Parts, doors Fenders > Fenders

payments atvfendersgo:

  • other
  • wallet: Apple-pay
  • credit card: Diners-club

seller atvfendersgo:

  • rating: 99.6%
  • # reviews: 13949
  • city: Columbus, Wisconsin

offer atvfendersgo:

  • started: February 16, 2026
  • options: Ship-to-home
  • quantity: 2
  • availability: In Stock
  • sold: 0
  • best offers: True

returns atvfendersgo:

  • policy: Returns Accepted
  • paid by: Seller
  • time: 30 Days

shipping atvfendersgo:

  • transit: 3-5 Days
  • cost: $0.00
  • class: Standard
  • type: Fixed
  • service: Standard
for models: 250ex, mark, for makes: honda, for years: 2008, type: parts,
category: atv parts > body frame > body parts, doors fenders > fenders, sku: 24836599541560881,
Honda Motorcycle 87121-HN6-A50ZA Is Similar To:
  • (14% similar) ...(August 23rd, 2015)
  • (18.6% similar) Usually cost approx. In some cases, stock mounting hardware is used to mount the fenders. This is a brand new plastic desert sand Mailer mfg. These boxes are too large to ship via us mail. With any questions prior to buying. Standard rear fender for a Honda TRX250R years these fenders are brand new ...(November 7th, 2018)
  • (18.6% similar) This fender is brand new in the bag with a 1 year limited manufacturer warranty against any breaking or cracking. This is a brand new plastic desert sand Mailer mfg. View my other offers. In some cases, stock mounting hardware is used to mount the fenders. Vented race front fender for a Honda ...(November 7th, 2018)
  • (31% similar) Free shipping. Get one while they last. Free shipping only includes the lower 48 states. Brand new neon yellow Mailer handle bar cover for TRX400EX years 99-04. This product has been discontinued...(July 11th, 2017)
  • (20% similar) ...(September 19th, 2018)
  • (23.7% similar) View my other offers. Shiny plastic rear fender for a Honda TRX450R years only. With any questions prior to buying. In some cases, stock mounting hardware is used to mount the fenders. In cases, where the stock hardware does not work, new mounting is provided with fenders. Usually cost approx. These...(September 19th, 2018)
  • (28.6% similar) Brand new white carbon fiber look Mailer radiator scoops for a TRX450R years these race are use with the MC Ty front fender and XC only. Front fenders sold separately...(July 12th, 2017)
  • (23.3% similar) This is a brand new electric blue shiny Mailer mfg. In some cases, stock mounting hardware is used to mount the fenders. View my other offers. Usually cost approx. With any questions prior to buying. These boxes are too large to ship via us mail. Plastic rear fender for a Honda TRX450R er years only...(September 10th, 2018)
  • (23.7% similar) With any questions prior to buying. In cases, where the stock hardware does not work, new mounting is provided with fenders. Plastic rear fender for a Honda TRX450R er years only. In some cases, stock mounting hardware is used to mount the fenders. These boxes are too large to ship via us mail. This...(September 20th, 2018)
  • (28.1% similar) Shipping price only includes the lower 48 states...(September 13th, 2018)
  • (20.2% similar) Brand new shiny plastic Mailer-mfg. With any questions. Shipping price only includes the lower 48 states. This fender is brand new in the bag with a 1 year limited manufacturer warranty against any breaking or cracking...(October 31st, 2018)
atvfendersgo logo
1 offer $42.18 USD
  • New. Offer #1 priced at $42.18 + $0.00 shipping estimate = $42.18* total. MARK.FREE SHIPPING

Copyright © atvfendersgo.com